GTA

All Springer/NP/PCP Air Gun Discussion General => European/Asian Air Gun Gates => China/Asian AirGun Gate => Topic started by: Mr. Grendel on January 08, 2012, 01:17:40 AM

Title: Advice on piston seal
Post by: Mr. Grendel on January 08, 2012, 01:17:40 AM

Who would make a quality piston seal for a Stoeger x20?

Title: Re: Advice on piston seal
Post by: cbx1980 on January 08, 2012, 01:48:27 AM

Here's a thread that should answer your question.

http://www.gatewaytoairguns.org/GTA/index.php/topic,19485.0.html (http://www.gatewaytoairguns.org/GTA/index.php/topic,19485.0.html)

Title: Re: Advice on piston seal
Post by: shadow on January 08, 2012, 08:27:33 AM

The piston seal is the New Gamo Tesla and the spring would be the E3650 or the Tarantula spring if you machine a delrin giude for it. I delrin guide would be great for the other spring also. Ed

Title: Re: Advice on piston seal
Post by: Mr. Grendel on January 08, 2012, 02:58:44 PM

Thanks gents!