GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: mcc1961 on December 11, 2011, 04:31:43 PM

Title: Benjamin Disco pump
Post by: mcc1961 on December 11, 2011, 04:31:43 PM

I have just ordered my disco and pump in one unit, just wondering if these pumps are durable?

Title: Re: Benjamin Disco pump
Post by: MustangMike on December 11, 2011, 04:34:16 PM

mine has held up good so far, but you can buy a rebuild kit for them when it goes out.. when you do have it apart you check the tubes for burrs and other gunk that will tear up orings.. ive seen some guys go through the pump and polish things then deburr some stuff that the pumps are good to go

Title: Re: Benjamin Disco pump
Post by: dk1677 on December 11, 2011, 04:35:50 PM

Just pump slow and take breaks, heat is the pump killer

Title: Re: Benjamin Disco pump
Post by: MustangMike on December 11, 2011, 04:37:23 PM

Quote from: dk1677 on December 11, 2011, 04:35:50 PM

Just pump slow and take breaks, heat is the pump killer

x2, from 1000psi to 2000psi takes me about 5 minutes and the pump is warm.. each stroke of the pump i time to take 3 to 4 seconds for each pump to keep the heat down