GTA

All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Show us your Custom Airgun Parts (TRICKS-N-TIPS) => Topic started by: Motorhead on December 09, 2011, 02:50:20 AM

Title: Designed and built a Custon Shroud
Post by: Motorhead on December 09, 2011, 02:50:20 AM

Parts built of Delrin and Pressed onto barrel so unremovable without cutting off.
Shroud built from 1" O.D aluminum X 1/16" wall floats on O-rings at receiver portion & Air stripper so barrel floats within shroud.
End cap also just press fit on o-rings having NO baffles forward of stripper to end cap being @ 2 1/2" distance.

Paint on shroud is drying so will post an assembled picture at a later date.

Title: Re: Designed and built a Custon one off Shroud
Post by: Motorhead on December 09, 2011, 03:07:01 AM

more pictures

Title: Re: Designed and built a Custon Shroud
Post by: Motorhead on December 10, 2011, 12:54:17 AM

All pressed together like this ...  ;D

Still a tack driver with such a nice sound

Title: Re: Designed and built a Custon Shroud
Post by: MustangMike on December 10, 2011, 01:07:32 AM

Quote from: Motorhead on December 10, 2011, 12:54:17 AM

All pressed together like this ...  ;D

Still a tack driver with such a nice sound

good deal that really does look good, im considering trying to make a custom shroud for the custom shoip 2400kt.. but use mrod baffles since i cant make them. then getting a section of something from lowes and have them cut it.. but the end caps are where im running into trouble.. might as well order a mrod shroud or prod shroud