GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: RedDirtDog on May 20, 2025, 03:56:28 AM

Title: Screw in front of trigger/some type of hammer adjustment? Vectis
Post by: RedDirtDog on May 20, 2025, 03:56:28 AM

I had my vectis apart for awhile and can’t find what this screw this is for and how to adjust it?
https://imgur.com/a/yxs49CQ
(https://imgur.com/a/yxs49CQ)

Title: Re: Screw in front of trigger/some type of hammer adjustment? Vectis
Post by: Back_Roads on May 20, 2025, 08:46:22 AM

 I have not had mine apart yet, it appears to be perhaps a grub screw to secure the barrel. IIR my Jet1 has something similar for the barrel.
https://hatsanairgunsusa.com/wp-content/uploads/2019/07/Vectis-Exploded-View.pdf

Title: Re: Screw in front of trigger/some type of hammer adjustment? Vectis
Post by: Deadrise Skiff on May 20, 2025, 02:08:19 PM

On my Flash R that screw rubs on the outside of the hammer.
Is that maybe the "anti knock" device?

Title: Re: Screw in front of trigger/some type of hammer adjustment? Vectis
Post by: RedDirtDog on May 22, 2025, 08:44:27 AM

Quote from: Deadrise Skiff on May 20, 2025, 02:08:19 PM

On my Flash R that screw rubs on the outside of the hammer.
Is that maybe the "anti knock" device?

that’s what it seems like, what is the default position? Maybe 1/4 turns out I’m guessing?