GTA
All Springer/NP/PCP Air Gun Discussion General => Back Room => Topic started by: jimbo on April 19, 2025, 05:11:47 PM
-
How come there isn't one for AEA?
-
There are many missing brands, and boutique guns too, in the list I have found out while sorting the big bore heard.
-
Impossible to have a board for each make and model.. a line had to be drawn somewhere. That's not to say that a few more will not be added. This is all still very much a work in progress.
Patience has been repeatedly ask for while these changes are being made.
Please continue to bare with us.
-
avator said:
"Please continue to bare with us.'
Y'ALL ARE GETTIN' NEKKID????!!!!
[Posted as is because I can't quote from a post, clicking on Quote in a post to which I want to reply gets nothing but a bar at the top of the page with Loading... in red with a red line below it across the whole page. And the only way I can reply is by using Quick Reply; clicking on REPLY in the post does nothing.]
-
I'm just wondering why the Airgun gate isn't at the top.
Don't mind me though, I just don't really like change very much.
-
I'm just wondering why the Airgun gate isn't at the top.
Don't mind me though, I just don't really like change very much.
I was wondering that too.
-
We've all been asked several times for suggestions. I recommend visiting one of the threads asking and suggest it.
Maybe even the Help Desk may get an answer.
-
We've all been asked several times for suggestions. I recommend visiting one of the threads asking and suggest it.
Maybe even the Help Desk may get an answer.
I should find one of those threads and suggest that the airgun gate and vintage airgun gate go further up before the individual brand / manufacturers gates.
-
And at least this sub section is all about BIG Bores,
Sam Yang/Seneca Airguns
Discussion of all models of Sam Yang and Seneca airguns.
The smaller Seneca calibers are listed in an other sub section called
Artemis/SPA Airguns?
Discussion of all models of Artemis airguns.
It took me several hours to find the proper sub section,
Very confusing at times.....ymmv
-
Don..
I'll have another look at the A/S board and see if I can do some fine tuning pertaining to the Seneca stuff. Work has been halted in the big bore stuff until a decision has been made on how to keep big bore separate.
But yeah, find the posts where Rick asked for suggestions and post in those. This way others can also weigh in.
Y'all keep in mind, Rick's plan is to make navigation easier for the new comers who don't have the experience that our more seasoned members have in the workings of the forum.
I still recommend a google search for specific things you might be looking for. I am near or at the top in total posts on the GTA and I use google all the time for searching within the forum.
-
Thanks Bill
"Y'all keep in mind, Rick's plan is to make navigation easier for the new comers who don't have the experience that our more seasoned members have in the workings of the forum."
I may not be an experienced member around here, but give me a map and compass, and I can do it...Lol
Tia,
Don
-
Bill
Here is a wild Idea,
How about putting a Simple note, something like this:
"To search for information here, use this:
Use Google search:" = (whatever the proper terms/wording is)
As I for one, can not find this info when needed.
Put this Search Notice in the main heading of every other section.
That way it would be "Right in your Face", so to speak etc,
and could be "easily found" by even a puter dummy like me.
Tia,
Don
-
Bill
Here is a wild Idea,
How about putting a Simple note, something like this:
"To search for information here, use this:
Use Google search:" = (whatever the proper terms/wording is)
As I for one, can not find this info when needed.
Put this Search Notice in the main heading of every other section.
That way it would be "Right in your Face", so to speak etc,
and could be "easily found" by even a puter dummy like me.
Tia,
Don
I'll pass the idea along to the "shot callers". ;D
-
And at least this sub section is all about BIG Bores,
Sam Yang/Seneca Airguns
Discussion of all models of Sam Yang and Seneca airguns.
The smaller Seneca calibers are listed in an other sub section called
Artemis/SPA Airguns?
Discussion of all models of Artemis airguns.
It took me several hours to find the proper sub section,
Very confusing at times.....ymmv
Yes. I didn't even know that Seneca fell under Artemis or Snowpeak until this categorization decision was made here.
-
I think the confusion came when Seneca was added to the Sam Yang board.
Sam Yang is a Korean airgun manufacturer. My Sumatra actually had Eun Jin embossed on the on the under side of the fore stock.
EDIT: Wait, I lied.. I just looked back and mine had SUMATRA engraved on the bottom of the fore stock. I've seen them with SENECA on them.
-
OK my Recluse has Sam Yang branding, my first edition Wing Shot has Art Venturi branding.
-
Yep... Sumatra on the wood and this was on the side.
-
Yep... Sumatra on the wood and this was on the side.
Sumatra sounds like that acrobatic multi position Indian Hindu whatchmacallit 🥴
-
Yep... Sumatra on the wood and this was on the side.
Sumatra sounds like that acrobatic multi position Indian Hindu whatchmacallit 🥴
Sounds like something you would find in a book on erotica. :o
-
Carma Samatra is the name :)
-
Carma Samatra is the name :)
[chuckling]
Not a book for a recluse. Partners required. [chuckling]