GTA

Airguns by Make and Model => Barra Airguns => Topic started by: cosmic on April 11, 2025, 07:59:59 PM

Title: Barra 250Z stock..
Post by: cosmic on April 11, 2025, 07:59:59 PM

Well I just received my 250Z.. Problem I can't unlock the stock to adjust it.. Any ideas ?

Title: Re: Barra 250Z stock..
Post by: wendy on April 12, 2025, 10:18:56 PM

Go to YouTube and watch the video on the disassembly of the Barra.

Title: Re: Barra 250Z stock..
Post by: cosmic on April 17, 2025, 08:58:48 AM

The video did not have anything on it so I pulled the pins and adjusted to my desired length... I was in touch with Barra and they were helpful..

Title: Re: Barra 250Z stock..
Post by: PumaCarl on April 19, 2025, 05:37:44 PM

 I had the same problem with mine and I had to pull the pins, which were bent, straighten them, and take down the pin that holds the stock where set to, about an 1/8". I used cylinder hones on the stock to open it up a little.

All the work I did, including mounting an arca swiss plate, was worth it, This gun shoots lights out.