GTA

Support Equipment For PCP/HPA/CO2 and springers ,rams => 3D printing and files => Topic started by: Blackmagic12 on March 25, 2025, 09:04:04 PM

Title: Improved 1/2-20 UNF and 1/2-28 UNEF Moderators.
Post by: Blackmagic12 on March 25, 2025, 09:04:04 PM

Hello.

Just made an improved variant of my 1/2-20 UNF and 1/2-28 UNEF Moderators for those who are interested.
Strengthened the expansion chamber and lengthened the stronger upper part of the moderator.
Also added markings to indicate what kind of threads the moderator is made for.

PS!
These are not tested by myself as of writing.

Regards.
Kent.   

Title: Re: Improved 1/2-20 UNF and 1/2-28 UNEF Moderators.
Post by: Katoomer360 on March 26, 2025, 07:41:14 AM

Hi, 

Thanks for doing this.  I would like to try this modulator on my P-Force rifle.  Would it be possible for you to design in 14mm x 1mm threads?  My stock modulator is a bit too loud for back yard shooting.

Thanks in advance.

Title: Re: Improved 1/2-20 UNF and 1/2-28 UNEF Moderators.
Post by: bduares on March 26, 2025, 09:07:44 AM

DonnyFL and Airgun Capital sell the metal adapters that let your gun use standard 1/2-20UNF moderators.