GTA

All Springer/NP/PCP Air Gun Discussion General => "Bob and Lloyds Workshop" => Topic started by: Rabbitstopper on February 26, 2025, 09:59:17 AM

Title: Could I Ask a Favour in Exchange For..
Post by: Rabbitstopper on February 26, 2025, 09:59:17 AM

Afternoon all as titled, I’ve got myself into a right pickle could I ask one of you kind gentlemen to measure and give the digits of the start of the bolt slot, its length and end for a 22xx, I will share my file, 3d printed, barrel and bolt run in a piece of seamless, threaded inserts for fixings more stiffening with ally pic rail. Nice fast and plenty stiff enough, I have a lever release and a straight pull if anyone is interested it needs development not far off just some niggles, thanks guys.

Title: Re: Could I Ask a Favour in Exchange For..
Post by: Gippeto on March 22, 2025, 09:18:43 PM

This should help.

(https://i.imgur.com/NSu8e7Ol.jpg)