GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Browser on February 12, 2025, 03:28:01 PM
-
Started building a 2400 converted to HPA, but somebody broke in and stole almost everything. Some years have passed and I'm looking to start this project again. I need directions. I still have a couple of Lothar Walther barrels ready to go, have a new discovery air tube, camo stock and fore grip, and a new 2240 with steel breech. I have Crosman receipt for all the parts i bought for it ($80) and can reorder, just need the directions on how to build it. Started this 10 years ago so there must be a "how to", does anybody know where to find the info? Thanks
-
You already have a PCP air vessel, so you should be good to go…How about its internal parts? And do take a photo of your parts and post it here.
How long are your barrels?
-
All internals stolen, have 11,12,14,23" barrels
-
If you got lathe and mill roll up your selves and start making what's missing to make it into a gun.
If you want I can give you an STL of a marauder breach block adjusted to whatever your tube diameter is + whatever shroud diameter you want.
I can also modify to whatever barrel diameter you want to shove in the block ...
But what you're likely missing is the valve assembly, the trigger assembly and the hammer.
I also have a block similar to the Artemis P15 ... but that I'm not giving the design away for free.
-
Remember that the Disco is only a 2k psi gun.
-
Because of the Crosman/ Daisy takeover, they are shipping all the parts to AR. Could be 2 more weeks before selling parts. Can't wait gotta build something now. So modifying the 2240 to thin out the squirrels. I have a couple of questions for the builders out there. I want to keep it as a pistol, how much barrel can I put on and still feel pistolish, is there a pistol grip set that would make it easier to hold up the longer barrel, I'm thinking 18" barrel with TKO. Also seems like Boss valve will be overkill for 18" barrel, would I be better off just enlarging and angling the exhaust port on the valve and also enlarging the transfer port and angling and enlarging the barrel port so there is a good flow path. I have solid hammer and hollow probe and 2220-103 grip frame and new 22cal LW barrel to cut.