GTA

GTA Intro and Help => Welcome New Members => Topic started by: Roel on January 08, 2025, 01:05:41 PM

Title: please allow me
Post by: Roel on January 08, 2025, 01:05:41 PM

Hi,

Roel is my name, i`m a Frysian and i`ve been here before. Had the luck of getting in here on my old account.

I just bought an Edgun R3M .22 and the US is the base for information. I think so because i couldn`t get any decent info elsewhere.

I`ll be hanging around here every now and then.

Best regards to the airgun community worldwide!

Title: Re: please allow me
Post by: mr007s on January 08, 2025, 05:13:24 PM

HOWDY, WELCOME, HAVE FUN, AND  "Follow the Yellow Brick Road”

Title: Re: please allow me
Post by: amb5500c on January 08, 2025, 08:14:34 PM

Welcome to the GTA.
Richard

Title: Re: please allow me
Post by: 7624452 on January 11, 2025, 05:24:51 AM

(https://www.gatewaytoairguns.org/GTA/gallery/albums/New/Dir_1/thumb_8660.JPG) (https://www.gatewaytoairguns.org/GTA/index.php?action=gallery;sa=view;id=8660)

Title: Re: please allow me
Post by: Roel on January 12, 2025, 12:53:36 PM

Hi,

thanks all for the welcome. Hardly any info on the R3M. But i shot it last friday, horrible groups at 50 meter, some two inches. Before this one i had the R3M Long in 25. Mags didn`t index and the groups were about 2 inches too at 50 meters.

Never mind the V0 or the pellet

Title: Re: please allow me
Post by: dk1677 on January 12, 2025, 07:36:18 PM

Welcome to the GTA Roel!

Title: Re: please allow me
Post by: AThomas on January 15, 2025, 02:11:52 PM

Welcome to the GTA!

Title: Re: please allow me
Post by: Roel on January 17, 2025, 05:56:07 AM

Oi,

done some testing again, this time with the single shot tray from Carm (wich is a great place to buy, very friendly and helpfull). Groups were a little bit better but nothing like the ones i read about.

Both Edguns are back to their owners.

Best regards, Roel