GTA

Airguns by Make and Model => Crosman Airguns => Topic started by: OTmachine on September 03, 2024, 05:41:24 PM

Title: Crosman 362 Multi-Pump Pellet Rifle Barrel and Air tube outside diameters?
Post by: OTmachine on September 03, 2024, 05:41:24 PM
Hello All,
Can anybody measure and post these sizes for me?  My cousin has a 362 that I would like to 3D print a Picatinny Rail and Moderator for.  I have some 1322 files that I believe that I can adjust, but need actual sizes.  I do not have the rifle in hand and his digital caliper is fluctuating a Lot.  I would like to have them ready to install next week when he stops by. 
TIA,   Keith
Title: Re: Crosman 362 Multi-Pump Pellet Rifle Barrel and Air tube outside diameters?
Post by: Mzq284 on September 03, 2024, 06:26:08 PM
If someone doesn't get you the dimensions before I get home from work  tonight I'll measure them for you. I don't get home till 12:30- 1:00am, so you might not want sit, watching for my reply! ;D
Title: Re: Crosman 362 Multi-Pump Pellet Rifle Barrel and Air tube outside diameters?
Post by: Psipumper on September 03, 2024, 06:39:56 PM
I measured a couple 362’s .
Barrels: .437 and  .4372
Tube O.D. : .7525 and .753
Title: Re: Crosman 362 Multi-Pump Pellet Rifle Barrel and Air tube outside diameters?
Post by: OTmachine on September 04, 2024, 12:02:44 AM
Thank you for the measurements!  Looks to be the same as a 1377 that I have as long the barrel to tube gap is the same.  I found a Crosman 1377 Picatinny rail on Thingiverse that looks like it will work.  Just going to stretch the Z axis 175% to make it 4 inches long.
Title: Re: Crosman 362 Multi-Pump Pellet Rifle Barrel and Air tube outside diameters?
Post by: chuckinohio on September 04, 2024, 12:52:38 AM
Quote from: Psipumper on September 03, 2024, 06:39:56 PM
I measured a couple 362’s .
Barrels: .437 and  .4372
Tube O.D. : .7525 and .753

  Same here
 .437
 .752
Title: Re: Crosman 362 Multi-Pump Pellet Rifle Barrel and Air tube outside diameters?
Post by: OTmachine on September 04, 2024, 01:05:25 AM
Thanks guys!  I appreciate it.   This is my first run at 3 1/2 inches long, PET G @240, build table at 80, 1.5 layers
Title: Re: Crosman 362 Multi-Pump Pellet Rifle Barrel and Air tube outside diameters?
Post by: OTmachine on September 13, 2024, 03:43:00 PM
Ended up with these which worked our great after some honing of the rail bore.