GTA

Support Equipment For PCP/HPA/CO2 and springers ,rams => 3D printing and files => Topic started by: Joe Shooter on June 29, 2024, 09:50:07 PM

Title: Benjamin Rogue .357 Single Shot Tray
Post by: Joe Shooter on June 29, 2024, 09:50:07 PM

I need a Benjamin Rogue .357 single shot tray...if anyone of you 3D printers knows how to make one.

Title: Re: Benjamin Rogue .357 Single Shot Tray
Post by: TorqueMaster on June 30, 2024, 06:02:10 PM

The loading port area looks pretty uncomplicated.  I designed something similar for my Fortitude, shouldn't be too hard to adjust to fit the Rogue.  If you can PM me the general shape you want and the critical dimensions, I should be able to make it happen.

EDIT--added image of Fortitude SST
It slides in from right-to-left, the cutout area goes around the part of the barrel that protrudes into the loading area.  The high wall helps loading (from the right.)  Could be mirrored for a lefty or chopped down to a universal trough.