GTA

Airguns by Make and Model => Air Venturi Airguns => Topic started by: DLP on January 24, 2024, 07:04:55 PM

Title: Air Venturi Wingshot parts supplier
Post by: DLP on January 24, 2024, 07:04:55 PM

I am looking for a supplier for an Air Venturi Wingshot shotgun parts. I picked up a used single tube Wingshot that the PO got water in the air tube. It rusted the air tube and fill plug threads together and started leaking. He stripped the  threads  on the plug while trying to take it out. The tube threads are still clean. I ordered a plug from PA. But it’s the wrong one. It was for a Seneca. But for a Sumatra-8. It looks identical but much smaller in diameter. My bad. I just took a chance as it was the only place that I could find one.  I did put a call in to Air Venturi. But haven’t heard back. Are there any other places that I might get the air tube plug? I would also need the oring, plastic plug and roll-pin that goes into the plug. Thanks guys. Darrell

Title: Re: Air Venturi Wingshot parts supplier
Post by: Back_Roads on January 25, 2024, 09:55:55 AM

 If AV can not help this would be my next try.  https://constant-acceleration-pneumatics.myshopify.com/products/cap-dragon-1

Title: Re: Air Venturi Wingshot parts supplier
Post by: DLP on January 25, 2024, 04:24:09 PM

Will do. Thank you