GTA
Airguns by Make and Model => Benjamin Airguns => Topic started by: GSu on November 17, 2011, 11:51:31 PM
-
My .22 Disco was delivered today! Had to finish the yard before I could play. Did the inspection and once over of everything, assembled the pump, cleaned the barrel, and looked for the scope to install and all was ready. Used a 3x-9x X 40 Leapers mil dot scope on medium height rings. No issues and used an old bore sight to align everything so the first shot was on the paper and 7 shots later zeroed. I only have about 10 yards to play with at home right now. Out of the box the accuracy is there using 3 different 14.3g pellets. and one 15.1g round nose. All group nice and tight but the best was shot using the Crosman premier round nose FT pellet (the one in the cardboard box). I need to finds the camera so be patient.
Did the 2 screw trigger mod too.
Glen
-
sweet ur going to love it
-
Congrats on the new shooter
-
Thanks guys,
I'm enjoying it too much already! After dinner had to shoot again. Trying not to rush everything but it is difficult not to.
Glen
-
Congrats on the new, very nice rifle. I hope that you will be pleased with it
-
you will be pleased with it
-
cograts on a great rifle.
joe
-
congrats!
-
let he mods begin... dude ive had my disco less then 3 weeks and im already about to be valve deep into it.. as soon as my crosman parts show im going to be tearing her down to the orings for upgrades
-
Congrats on the new rifle. Fun, aren't they. :)
If you need a pump let me know via PM (I have a brand new one going on the classified).
-
Congrats! You should love it
-
0351_Vet, Thanks got the Disco w/ pump.
Mike,
Mine is 2 days old and it has 2 barrel bands, extended bolt I made, an aluminum hammer spring guide, the 2 screw trigger mod, lighter trigger spring, and an LDC I made. I was trying not to do much to the gun. But the trigger sucked, the bolt didn't seal, and I just couldn't resist not sending another Crosman warranty card in. Gee that makes 5 total, 2- 2240, 1-1377, 1- Trail NP XL, and the Disco!
Glen
-
congrates, have fun modding it