GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Wbldon on January 03, 2024, 01:50:12 PM
-
I just recently ordered a Hatsan Jet 1 in 25 caliber. I like to keep some spare parts on hand for potential issues that my arise and that is the reason for my most.
Is anyone aware of aftermarket valves (poppets, to replace the ones that typically break) for this airgun. Also looking for reduced power hammer springs...
Finally, can someone point me to a video on tearing the Jet 1 down. I am sue I can figure it out but sometime its easier to watch how it is done the first time in case there are any tips or tricks to make it a bit easier...
Thanks in advance.....
Wbldon
-
I just recently ordered a Hatsan Jet 1 in 25 caliber. I like to keep some spare parts on hand for potential issues that my arise and that is the reason for my most.
Is anyone aware of aftermarket valves (poppets, to replace the ones that typically break) for this airgun. Also looking for reduced power hammer springs...
Finally, can someone point me to a video on tearing the Jet 1 down. I am sue I can figure it out but sometime its easier to watch how it is done the first time in case there are any tips or tricks to make it a bit easier...
Thanks in advance.....
Wbldon
OD for replacement hammer spring go with .300 .040 wire thickness. I had springs from old crosman projects I'm using. M4 allen key long for reaching grip screw. It pretty simple gun when you get it apart.
-
Google, (Hatsan air guns exploded views) scroll down the list to the Jet. HTH
-
Thanks so much for the hints, I got a copy of the Exploded view.
Now just need to be patient (not one of my strong points) and wait for the gun to show up...
Again thanks & keep the suggestions coming..
Wbldon