GTA

Support Equipment For PCP/HPA/CO2 and springers ,rams => Support Equipment For PCP/HPA/CO2 => Topic started by: Rubicon on September 22, 2023, 03:35:56 PM

Title: Air Venturi nomad II
Post by: Rubicon on September 22, 2023, 03:35:56 PM

Hello folks, I purchased a nomad 2 about 8 months ago and I never got it to work. With the plug it does not produce pressure at all. All steps by the book and without plug I can block air with my pinkie. Any ideas? It is brand new and an exchange as the previous compressor did the same.

Title: Re: Air Venturi nomad II
Post by: rdtricks on September 23, 2023, 01:51:13 PM

I would contact the vendor and request a replacement or refund.  Nomad III is now available if you want to stay with Air Venturi and the Nomad line

Title: Re: Air Venturi nomad II
Post by: avator on September 23, 2023, 03:43:12 PM

Yeah, I wouldn't hold still for that... even if it took 10 returns.... replace it at no cost to me or give me a full refund.

Title: Re: Air Venturi nomad II
Post by: Back_Roads on September 28, 2023, 09:12:21 AM

 Possibly a missing O-ring on the foster fitting ???

Title: Re: Air Venturi nomad II
Post by: maraudinglizard on September 28, 2023, 10:38:05 AM

Did you close the drain valve under the compressor and the relief valve at the front of the compressor. The drain is open when shipped. Also check to see if the nylon bushing is still in the holes for the drain valve and relief valves. Also check your burst disc next to the relief knob, it's possible that it has failed.  If all fails, return for refund or replacement from the vendor. Good luck.