GTA

Airguns by Make and Model => Benjamin Airguns => Topic started by: IOWOLF on June 29, 2023, 12:42:44 PM

Title: Help, Benji. disassembly??
Post by: IOWOLF on June 29, 2023, 12:42:44 PM

For the life of me I don't remember....

 The square holed brass threaded piece that holds the valve in, is there a trick to removing it? pretty sure its not a left hand thread.

Yes I have the tool, but haven't had one apart in 25 years.

TIA

Title: Re: Help, Benji. disassembly??
Post by: Ronno6 on June 29, 2023, 01:51:03 PM

I have not had any trouble removing the square holed nut...
Standard right-hand twist as I recall.....CCW removal.
Then made a puller to easily remove the valve body..........saves the lead seals for re-use.

Good luck.

Title: Re: Help, Benji. disassembly??
Post by: Van on June 30, 2023, 08:28:09 AM

   I found soaking it with a squirt or two of liquid wrench for a day helps getting it started.  Stick a long metal rod for a leverage handle through the hole in the end of the tool and keep bumping it over & over till the nut breaks loose.  That always worked for me on the three guns I have had to reseal.