GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Ronno6 on June 07, 2023, 04:42:54 PM
-
I had a guy come by with a leaky Discovery.
Leaked back out the fill fitting.
Turned out to have a bad check valve O-ring
Exactly the same as the poly O-ring I put on the brass bolt probe that I make for Crosman 2200.
Installed it and filled her up to the sweet sound of silence from the fill port.........
Nothing like a 5 minute repair..........better to be lucky than good........
-
Have three Maximus... picked up one From Midway when they were clearing them out at discount and free shipping...had been sitting for 4 years... same prob... Still is the only oring have replaced and still holds air 3 years later.. :o
-
Nothing like a quick easy fix especially for a PCP! Nice job!