GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: CitySniper on November 09, 2011, 12:55:15 PM

Title: Disco DIY...Stolen from the other forum
Post by: CitySniper on November 09, 2011, 12:55:15 PM
Saw this lastnight, and thought it was a pretty good idea. Even though I wont be doing it to mine, This guy could not fill is gun with his new LDC, so he switched the gauge and fill nipple around. ( No extra parts were needed )

(http://i125.photobucket.com/albums/p73/jams_photo/IMG_0472.jpg)
(http://i125.photobucket.com/albums/p73/jams_photo/IMG_0471.jpg)
(http://i125.photobucket.com/albums/p73/jams_photo/IMG_0467.jpg)
Title: Re: Disco DIY...Stolen from the other forum
Post by: MustangMike on November 09, 2011, 01:48:06 PM
That's very interesting, would maybe consider do that if I was making another stock for the disco so I wouldn't have to drill the 1in hole for the gauge...
Title: Re: Disco DIY...Stolen from the other forum
Post by: joe k on November 09, 2011, 02:01:07 PM
yeah saw that on the yellow pretty good idea.
joe
Title: Re: Disco DIY...Stolen from the other forum
Post by: SAADE on November 09, 2011, 02:04:48 PM
Smart, I like it.
Title: Re: Disco DIY...Stolen from the other forum
Post by: newguyontheblock (Nathan) on November 10, 2011, 04:56:12 AM
i may do that to tether my disco when im shooting out on the deck, that is a great idea!

i can keep it around 1800 PSI and pop dime sized holes with out even bothering to get up and go fill it!!
Title: Re: Disco DIY...Stolen from the other forum
Post by: Nomadic Pirate on November 10, 2011, 12:12:36 PM
I'm gonna do that on my Maurader Carbine :)  looks much better that way
Title: Re: Disco DIY...Stolen from the other forum
Post by: RatRacer on November 10, 2011, 12:20:12 PM
Just don't check the fill pressure with gun loaded and safety off.

YouTube is everywhere.......(http://i169.photobucket.com/albums/u230/Rateracer/GIF/020.gif)
Title: Re: Disco DIY...Stolen from the other forum
Post by: TOM aka critter99 on November 10, 2011, 12:30:31 PM
gauges on the front of tne air tube are common...

I always wondered why high end makers like FX, CZ etc would put a gauge where basically you have to point the rifle at yourself to see it ????