GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: FlyFisherMan101 on February 02, 2023, 08:55:18 AM

Title: Bengamin Cayden Akela Kratos pressure guage threads and seal
Post by: FlyFisherMan101 on February 02, 2023, 08:55:18 AM

Hi does anyone know what the pressure guage threads are and what type ? does
the rifle need or use an oring to seal the guage if so what size or is teflon tape ok
or a bit of removable locktite thanks again

Title: Re: Bengamin Cayden Akela Kratos pressure guage threads and seal
Post by: Trucker3573 on February 02, 2023, 07:09:26 PM

Not sure of the threads but I think most of the gauges on these guns just have a small nylon/polymer washer behind them in the gun. The little white ones. I can’t think of the tech name for them. You just tighten the gauge a little bit into them. Often you can reuse them.

Title: Re: Bengamin Cayden Akela Kratos pressure guage threads and seal
Post by: FlyFisherMan101 on February 02, 2023, 11:57:04 PM

Thanks trucker