GTA
Airguns by Make and Model => Benjamin Airguns => Topic started by: NorCalXSNIPER on November 05, 2011, 04:36:27 PM
-
I was curious about the bushing kit for my Benji NPXL .22 and I wanna know a little more about it. what it is? what it does? what kind of improvement can I expect from my rifle after it is in? all that stuff...........anyways I'm gonna get it of course and I just wanted to know a little more about it. along with a GRT 3 what else can I do to this gun myself?
-
Bushings stabilize the piston and the NP SO THAT EVER THING LINES UP AND NO COCKING OF EITHER or misalignment. You can deburr the working parts, polish and re-crown the barrel, re lube, change the trigger, replace the plastic barrel washers with brass, paste the barrel and many other things.
-
Needed on Nitro Titan? Or is it just too long kind of pistons?
-
Needed on Nitro Titan? Or is it just too long kind of pistons?
Benjamin NPXL 1100 .22, i like the thing so far and I plan to keep it and get the most out of it. I don't even think the thing is fully broken in yet only got about 250 pellets through it
-
The grs kits will fit all the Crosman pistons, just make sure you get the right one.
pv
-
Ok! Thanks! Where can I buy it? who? carrying into Sweden
-
Check out "Genes tunz & toys" in the GTA mall
-
AIRGUNTOYS
-
A rose by any other name would smell as sweet! ;)
pv
-
Thanks!
-
:'( I can not find tunz Genes & Toys! : (Is new to the forum and is from Sweden so sorry get my English
-
http://www.airguntoys.com/ (http://www.airguntoys.com/)
-
thank you! But it says nothing about international shipping. And can not find a mail so I can ask.
-
Hi
Since you are in sweden you might find someone local to turn out a cup to fit the gas spring like these of hard plastic. Chose a plastic that is tough not brittle.
Cut it to slide into the piston easily and a tight slip fit on the cylinder.
Your gas spring may show scratches from rubbing on the piston.
Good luck
Order the brass washers and bushing from airguntoys. a better combo and will tighten the hinge. Easy to install.
-
sales@airguntoys.com <sales@airguntoys.com>;
Should get you there!!!
Gas Ram Mod Parts
Item# Brass Washer , GRS Kits: GRS-NP Bushing/Washers
-
I'm gonna get the setup for my np xl for sure... thanks fellas
-
thanks guys!! I have mailed them and asked about shipping.
but the advice from their own bushes are not so bad:)
running on it if it does not go well.
-
Both sources are the same, just a different name, Not to worry, I would guess the shipping wouldn't be too expensive to Sweden, the kit is very light.
pv
-
Have e-mailed them and they would not ship to Sweden: (Why ????? It's just typing "SWEDEN" on packetet and take more money. I am happy to pay double or more simply they want to send. So I am happy to pay approximately 50dollar for a kit.