GTA
Airguns by Make and Model => Benjamin Airguns => Topic started by: Psipumper on November 20, 2022, 11:23:55 AM
-
I would like to know about how high the peep hole is above the receiver .
The later models with the round receiver.
Could a few folks with the 5dsh measure this distance. How close is it to the center of the elevation adjustment?
Thanks .
-
I would like to know about how high the peep hole is above the receiver .
The later models with the round receiver.
Could a few folks with the 5dsh measure this distance. How close is it to the center of the elevation adjustment?
Thanks .
I just got a D5 for another project, I have my calipers out in the freezing truck ATM, but with a measuring stick I get 2cm for the OE sights and also for the 5dsh.
-
what does the 5dsh mean?
-
5dsh is the model number for the williams peep sight that fits Sheridan and later Benjamin guns. The sh stands for Sheridan
-
And lore has it that the 5d stands for 5 dollar because that was the price when that model was introduced.
-
After reading reviews of the 5dsh sight , some people had to grind the sight to allow it to go lower.
If you pump to 14 pumps it most likely will require a higher front sight along with the lowest setting on the rear. Here is a photo from one of the reviews. Looks about 9/32 above the receiver.