GTA
All Springer/NP/PCP Air Gun Discussion General => Air Guns And Related Accessories Review Gates => Air Gun Review Gate => Topic started by: robert w on October 30, 2011, 06:31:34 PM
-
my wife brought 1 of the rugers home from wally world. when i opened the plastic package i heard a rattle inside so off with the grips,frame . wooah the saftey pin and spring was just floating around so i put it in the proper place ,then had a look around inside .cheep plastic trigger parts, loose fitting plastic pins, and enough oil for the whole lot of us using air guns. then out side for the test. first thing no pellets fit ,it has too small of bore so i got my bic pin and pushed them in . the trigger wasnt too bad about 4 pounds of pull. it shot low and to the left so i adjusted and shot . low and to the left so i adjusted again. this goes on for a while so i left the cocking rod on , it hit close to the middle of the target .no matter what i shot or type of hold i had it never grouped closer than 3 inches. tomorrow its going back to wally world and im calling p.a.m. and ordering that diana LP-8. my conclusion save your time and money ,look the other way when in the market for a pistol like this 1...
-
Thanks for the info
-
i forgot to add i was trying rws superpoint extras and at 20 feet it wouldnt put 1 halfway in a soft piece of douglas fir , the whole skirt was sticking out !!! umarex needs to keep these cheep guns, but its heavy enough to throw and use as a club.