GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: PasadenaMike on September 14, 2022, 12:28:09 AM

Title: Beeman 1358 tank size?
Post by: PasadenaMike on September 14, 2022, 12:28:09 AM
Hello anyone know the air cylinder size of the Beeman 1358?
Title: Re: Beeman 1358 tank size?
Post by: 7624452 on September 14, 2022, 02:51:38 AM
26mm
Title: Re: Beeman 1358 tank size?
Post by: PasadenaMike on September 14, 2022, 02:05:01 PM
Sorry I meant the volume
Title: Re: Beeman 1358 tank size?
Post by: x3baddad on September 14, 2022, 02:09:36 PM
not sure where I read it once on a uk site but 130cc seems about right
Title: Re: Beeman 1358 tank size?
Post by: PasadenaMike on September 14, 2022, 02:32:27 PM
Quote from: x3baddad on September 14, 2022, 02:09:36 PM
not sure where I read it once on a uk site but 130cc seems about right

I can’t imagine it’s anything bigger
Title: Re: Beeman 1358 tank size?
Post by: Robert 5mm on September 14, 2022, 05:15:27 PM
Does anyone know the I.D. of the cylinder - for regulator size
Title: Re: Beeman 1358 tank size?
Post by: jjohnsonlta on September 16, 2022, 10:16:03 AM
Tank ID 22mm according to Kerndtc. 160cc tank volume also per Kerndtc. See post " Have I gone too far? Beemen 1358.
Title: Re: Beeman 1358 tank size?
Post by: Robert 5mm on September 16, 2022, 03:22:00 PM
Quote from: jjohnsonlta on September 16, 2022, 10:16:03 AM
Tank ID 22mm according to Kerndtc. 160cc tank volume also per Kerndtc. See post " Have I gone too far? Beemen 1358.

The GTA search stinks - never found it - thanks for the info - now Land Regulators site is down
Title: Re: Beeman 1358 tank size?
Post by: Raptor72 on September 16, 2022, 06:03:10 PM
https://www.gatewaytoairguns.org/GTA/index.php?topic=194627.0 (https://www.gatewaytoairguns.org/GTA/index.php?topic=194627.0)
 Tried to post his thread. Don’t know if this is right though. Try member search for his threads.
Title: Re: Beeman 1358 tank size?
Post by: Robert 5mm on September 17, 2022, 10:26:29 AM
Thanks - I was looking for the ID for installing a Lane Regulator = 22mm
Title: Re: Beeman 1358 tank size?
Post by: starlingassassin on September 17, 2022, 10:59:58 AM
Quote from: Robert 5mm on September 17, 2022, 10:26:29 AM
Thanks - I was looking for the ID for installing a Lane Regulator = 22mm


if you find out which regulator fits,
please post it here,
i would love to reg the 1357 i just got,
it seems to like slugs better than pellets,
but only on the flattest part of the curve i was able to achieve after clipping a bit more than a coil off the stock spring.