GTA

All Springer/NP/PCP Air Gun Discussion General => Projectiles => Boolit and Pellet Casting => Topic started by: Baco on June 20, 2022, 12:18:40 PM

Title: press
Post by: Baco on June 20, 2022, 12:18:40 PM

i have to buy a press locally for swaging slugs, how many kg of force does it need to press 5mm wire of pure lead? i can source a small one of 100kg or a proper arbor press of 500kg for more money but im afraid its overkill

Title: Re: press
Post by: customcutter on June 20, 2022, 08:19:17 PM

I would contact the Die Mfg.  I'm sure they can recommend one.  It doesn't require a Corbin press though. :o

Title: Re: press
Post by: customcutter on June 20, 2022, 08:33:08 PM

I have a Redding 700 Ultra Mag.  It swages .223 boolits using spent .22 casings and pure lead inserts.  I swage the inserts to proper weight from cast lead blanks.  Any press with dual arms to support the head should work.  The Ultra Mag might give you a better mechanical advantage due to size and length of the arm.

Title: Re: press
Post by: Baco on June 20, 2022, 10:28:28 PM

i don´t have any of those options available here but i guess half a ton at a good gear ratio should be enough right?

Title: Re: press
Post by: Insanity on June 21, 2022, 05:12:19 PM

If that is all that is available to you then the more the better. You will never regret having a more powerful press if you are able to use it for other jobs.