GTA

Airguns by Make and Model => Benjamin Airguns => Topic started by: tennx on May 25, 2022, 01:17:14 PM

Title: 392S and CPUM 14.3
Post by: tennx on May 25, 2022, 01:17:14 PM

This gun will not shoot them…I can run anything else thru it …then reach for a CPUM …always left and low…like clockwork….it is dime size.. rested  @ 25 feet with most everything else…and ring that chili can @ 30yards….really likes H$N FTT 14.6…..only reason it rankles me is I got a bunch…fortunately other guns not so picky (specially the QB’s). lol..rant over….

Title: Re: 392S and CPUM 14.3
Post by: Mr. Panther on May 25, 2022, 01:27:53 PM

 I always sight my gun in for what ever I have the most of , LOL. If I know how something else works I just do like I did as I learned as a kid and use " Kentucky windage". It can be aggravating though.

Title: Re: 392S and CPUM 14.3
Post by: longhunter on May 25, 2022, 01:40:53 PM

Polish the snot out of the crown. I use the tapered felt cone, on a dremel, with polishing compound.
I have yet to come across a gun, that I can't make shoot the Crosman pellets accurately.

Title: Re: 392S and CPUM 14.3
Post by: lillysdad621 on June 03, 2022, 12:10:44 AM

Polish the snot out of the crown.
+1
use some paint thinner on a Qtip and clean any paint that may have dripped  inside the crown. If  that does not do it follow above instructions. be very careful, the gun is made out soft metal, so any rough work on the crown may be detrimental if you deform the rifling. Mine did the same... the paint trick worked wonders.

Title: Re: 392S and CPUM 14.3
Post by: tennx on June 03, 2022, 08:06:36 AM

Cleaning the paint didnt work..and Im not a big polisher….gun shoots everything else fine…and I got plenty of guns that can shoot the pellet….no deal breaker for me…

Thanks for the replies…