GTA

All Springer/NP/PCP Air Gun Discussion General => Projectiles => Boolit and Pellet Casting => Topic started by: brewbear on April 03, 2022, 04:46:57 PM

Title: .20 cal slug mould request
Post by: brewbear on April 03, 2022, 04:46:57 PM
Hi all,
This thread will be for you sign up if you want to purchase a mould for .20 caliber slugs. There is no guarantee this will come to fruition, especially if not enough people show an interest.
If you'd rather have a mould in .177, then add your name to this list https://www.gatewaytoairguns.org/GTA/index.php?topic=198096.0 (https://www.gatewaytoairguns.org/GTA/index.php?topic=198096.0)

List for .20 caliber:
   brewbear - 2 or 4 cavity, not particular on materials,
Title: Re: .20 cal slug mould request
Post by: rsterne on April 03, 2022, 04:48:57 PM
Note that if it happens, the .20 cal will be the same lengths as the .177 drawing, made using the same tooling with the path interpolated to a larger diameter.... Drawing for the .177 cal. is in Reply #28 here.... https://www.gatewaytoairguns.org/GTA/index.php?topic=197996.28 (https://www.gatewaytoairguns.org/GTA/index.php?topic=197996.28)

Bob
Title: Re: .20 cal slug mould request
Post by: The_Hare on April 03, 2022, 08:18:42 PM
Add me to the list for a .20 cal. mold as well.

Jonathan
Title: Re: .20 cal slug mould request
Post by: Back_Roads on April 03, 2022, 10:27:33 PM
 .20 cal here too  8)
Title: Re: .20 cal slug mould request
Post by: Kmanca1 on April 04, 2022, 11:24:12 AM
 ;)
Still wanting.....
Still waiting....
Still hoping....

I N-E-E-E-E-D one!
Title: Re: .20 cal slug mould request
Post by: Nvreloader on April 04, 2022, 12:28:27 PM
I am in for one also, 4 cavity and Alum or steel.
Don
Title: Re: .20 cal slug mould request
Post by: Franklink on April 04, 2022, 04:21:10 PM
Add me to the list as well please. .20 in the 19-20 grain range, 4 cavity alum
Title: Re: .20 cal slug mould request
Post by: rsterne on April 04, 2022, 06:20:31 PM
You don't need to post any more.... These are going to be run (when I don't know yet)....

Bob