GTA
All Springer/NP/PCP Air Gun Discussion General => Air Gun Gate => Topic started by: Craig3R on March 01, 2022, 10:00:21 PM
-
If you have one of those classy Umarex CO2 pistols (like my Beretta 92 FS) but it has gradually shot slower and slower here is a temporary fix until it can be repaired properly.
You just need a small metal washer (Or a tiny piece of one) and some crazy glue. Clean off the hammer the best you can, and simply glue the washer to the strike area of the hammer. Be sure to align the metal portion (not the hole) of the washer (red) with the pin (yellow) See pic. That added thickness of the washer allows more CO2 to be released during the shot cycle.
If this is the wrong GTA area please feel free to move it. Thanks.