GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Big Bore AirGun Gate => Topic started by: Nomadic Pirate on October 11, 2011, 05:44:53 PM

Title: Any caster out there that makes a .500 roundball ?
Post by: Nomadic Pirate on October 11, 2011, 05:44:53 PM
If any of you have any info of a caster that makes a .500 Roundball, or a short .500 bullet it would be much appreciated.

Thanks

M
Title: Re: Any caster out there that makes a .500 roundball ?
Post by: SAADE on October 11, 2011, 06:25:36 PM
Cabelas Bargain Cave  http://www.cabelas.com/product/Hornady-Round-Balls-150-Per-100/734611.uts?Ntk=AllProducts&searchPath=%2Fcatalog%2Fsearch.cmd%3Fform_state%3DsearchForm%26N%3D0%26fsch%3Dtrue%26Ntk%3DAllProducts%26Ntt%3D.50%2Bround%2Bball%26WTz_l%3DHeader%253BSearch-All%2BProducts%26x%3D23%26y%3D16&Ntt=.50+round+ball&WTz_l=Header%3BSearch-All+Products (http://www.cabelas.com/product/Hornady-Round-Balls-150-Per-100/734611.uts?Ntk=AllProducts&searchPath=%2Fcatalog%2Fsearch.cmd%3Fform_state%3DsearchForm%26N%3D0%26fsch%3Dtrue%26Ntk%3DAllProducts%26Ntt%3D.50%2Bround%2Bball%26WTz_l%3DHeader%253BSearch-All%2BProducts%26x%3D23%26y%3D16&Ntt=.50+round+ball&WTz_l=Header%3BSearch-All+Products)
Title: Re: Any caster out there that makes a .500 roundball ?
Post by: Nomadic Pirate on October 11, 2011, 09:52:49 PM
the Hornady .50 Roundball is actually .495, I'm looking for .500 :)
Title: Re: Any caster out there that makes a .500 roundball ?
Post by: SAADE on October 12, 2011, 02:41:44 PM
.005 or .0025 per side too small huh?

Tried any other black powder sites or loaders?
Title: Re: Any caster out there that makes a .500 roundball ?
Post by: badgerfarm on November 06, 2011, 01:32:05 AM
Try over on the NSSA skirmishers website.  There are a couple of guys there that can point you in the right direction.  You might need to have a custom mold made to get it done though.
Title: Re: Any caster out there that makes a .500 roundball ?
Post by: badgerfarm on November 06, 2011, 01:36:33 AM
I forgot to mention that you might try NEIhandtools.com   He has an extensive line of molds both round ball and short ogive bullets.