GTA
GTA Airgunning Classifieds => Hobbyist Classifieds Gate => Hobbyist Classifieds Archive => Topic started by: Ronno6 on October 03, 2021, 01:26:44 PM
-
Having received excellent reports from the testers who have installed and used this mod, I will offer it to the Membership at a reduced price.
If you have read the threads, you understand that my kit is a basic re-design of the Daisy 880 series trigger, including:
Daisy 880, 881, 822, 922, 970, 917, 35, 901, Winchester 77XS and 1977XS (and maybe others)
Trigger pull in these rifles has been shown to reduce the pull from the stock 6 to 7-1/2# pull in stock configuration, to 1 to 1-1/2# !!
However, this kit will NOT fit in the V.1 880 rifles that do not have the flat spring in the trigger assy. (round exhaust valve.)
The flat spring will need to be removed for this mod, but that is usually the 1st thing to go anyway.
Unlike most other mods, this kit allows full functionality of the safety........
If you can disassemble and reassemble the 880 trigger and sear, you can install this kit!
Price for the kit is $12.50 plus $5.00 shipping to lower 48 states.
Paypal is preferred.....
NOTE- This kit has worked in all but 1 China made 880 that it which it has been installed.
I have a slightly different setup should any installer run into problems with those, but it is slightly more difficult to install....
It has performed flawlessly in the Winnie 1977's....
Just shoot me a PM............