GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: PasadenaMike on June 02, 2021, 01:16:18 PM
-
Hey folks I’ve watched YouTube videos on how to rebuild hand pumps in preparation for when it’s time to rebuild my AV G7 hand pump. On a scale of 1-10 how difficult is it ? Looks straight forward online. Please inform. Thanks
-
Mike, they are pretty str8 forward...just takes a little time so I’d say a 2-3.
-
Mike, they are pretty str8 forward...just takes a little time so I’d say a 2-3.
I figured. It’s nice to read it from folks here thank you
-
Mike, I have one old Benjamin hand pump that dates back to 2013. It has been in continuous use during those years - so it has been taken apart several times to replace o-rings. After all that practice, I can disassemble, clean, change what is worn, lubricate, and reassemble in about 30 minutes. Bingo! I am back in business.
Basic tools are all that is required along with a little perseverance. (Don't try to over-tighten things when reassembling. Snug usually works.)
-
Mike, I have one old Benjamin hand pump that dates back to 2013. It has been in continuous use during those years - so it has been taken apart several times to replace o-rings. After all that practice, I can disassemble, clean, change what is worn, lubricate, and reassemble in about 30 minutes. Bingo! I am back in business.
Basic tools are all that is required along with a little perseverance. (Don't try to over-tighten things when reassembling. Snug usually works.)
Thank you for the encouragement and tips