GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: point177 on May 27, 2021, 04:48:15 AM

Title: Applying the Safepac or Hipac idea to a 1377 pump air pistol
Post by: point177 on May 27, 2021, 04:48:15 AM

After looking at the Safepac and Hipac idea, I got wondering about applying it to the 1377.

The pump and linkage assembly goes away and gets replaced with the HPA reservoir, also the barrel band will have to be modified.
Agreed shot count wont be high due to lesser volume than a 2240 platform but can be compensated some by a slightly longer tube.

I have seen Bob Sterne applying the idea for a larger volume for the valve so it must be doable.

Your thoughts ?

Manish

Title: Re: Applying the Safepac or Hipac idea to a 1377 pump air pistol
Post by: longhunter on May 27, 2021, 10:01:13 AM

Belongs in the darkside.

Title: Re: Applying the Safepac or Hipac idea to a 1377 pump air pistol
Post by: Model25 on May 28, 2021, 12:16:49 AM

Those guns are not poppet valve guns but instead dump the entire content of available air per shot.
Mike