GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: robs5230 on May 18, 2021, 04:41:57 PM

Title: 1720 trigger adjustment
Post by: robs5230 on May 18, 2021, 04:41:57 PM

Hi
Now at the pont where I think I need to get the trigger adjusted better.
Its still breaking a bit too heavy and not quite clean enough.

Can anyone advise on teh second stage adjustment?
Is it clockwise (in) or anti clockwise (out) to lessen sear engagement ?

Thanks

Title: Re: 1720 trigger adjustment
Post by: airpuffhunter on May 18, 2021, 07:27:26 PM

hello Rob

something like this?
https://www.gatewaytoairguns.org/GTA/index.php?topic=138633.0 (https://www.gatewaytoairguns.org/GTA/index.php?topic=138633.0)

Title: Re: 1720 trigger adjustment
Post by: robs5230 on May 19, 2021, 04:10:33 AM

Quote from: airpuffhunter on May 18, 2021, 07:27:26 PM

hello Rob

something like this?
https://www.gatewaytoairguns.org/GTA/index.php?topic=138633.0 (https://www.gatewaytoairguns.org/GTA/index.php?topic=138633.0)

Thanks for that.
The trigger unit on the 1720 is different and a proper 2 stage trigger, though the polishing priciples of the sear contact faces is the same.

Title: Re: 1720 trigger adjustment
Post by: 7624452 on May 19, 2021, 02:17:12 PM

  ;D