GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Gone Fishing on May 15, 2021, 01:23:54 AM
-
Post your tactical setups here
-
Following
-
Too many for a post, skim through this link there should be close to 1/2 the pics are some degree of tactical.
https://www.gatewaytoairguns.org/GTA/index.php?action=media;sa=album;in=318 (https://www.gatewaytoairguns.org/GTA/index.php?action=media;sa=album;in=318)
-
My Custom .177 build
-
Two of mine. .25 Gen1 Marauder in Teryx stock and a custom Airgun Revisions/Cothran .30.
-
1720T converted to magazine fed in a Rapid-70 bullpup kit.
(https://i.imgur.com/rJGKC9O.jpg)
(https://i.imgur.com/0U8nxiL.jpg)
-
Love the builds I am seeing. Custom rigs get my juices flowing :)
Custom 5 lb .25 cal marauder build.
Mods: Regulated, .225"ported, custom valve work / peek poppet, MDS hammer with custom valve lift limiter, custom ssg carrier system, custom ldc, 33cc plenum extension, trigger pull @ 13~ oz. Custom modded gen 1 bolt probe to aid the flow the .225 porting needs. Scratches my itch.
(https://i.ibb.co/tZshq9p/new.jpg) (https://ibb.co/M8Vhcmk)
-
BSA Ultra bullpup:
(https://live.staticflickr.com/65535/50508319261_6c7fb18ae7_k.jpg) (https://flic.kr/p/2jXfkCH)DSC00462 (https://flic.kr/p/2jXfkCH) by abbababbaccc (https://www.flickr.com/photos/11843711@N08/), on Flickr
With camo:
(https://live.staticflickr.com/4121/35732918726_327a16c7cb_c.jpg) (https://flic.kr/p/WrAxPC)Viking-1 (https://flic.kr/p/WrAxPC) by abbababbaccc (https://www.flickr.com/photos/11843711@N08/), on Flickr
-
BSA Ultra bullpup:
(https://live.staticflickr.com/65535/50508319261_6c7fb18ae7_k.jpg) (https://flic.kr/p/2jXfkCH)DSC00462 (https://flic.kr/p/2jXfkCH) by abbababbaccc (https://www.flickr.com/photos/11843711@N08/), on Flickr
With camo:
(https://live.staticflickr.com/4121/35732918726_327a16c7cb_c.jpg) (https://flic.kr/p/WrAxPC)Viking-1 (https://flic.kr/p/WrAxPC) by abbababbaccc (https://www.flickr.com/photos/11843711@N08/), on Flickr
Nice work.
Mike
-
That Ultra BP conversion is sweet. How does the cocking mechanism fuction?
-
RAW HMx LRT .22 Chassis
-
This one is a PP750 with a 12” BSA ultra barrel , CARM magazine , AR15 handguard , Atlas clone and the cherry on top a Vortex venom 3moa red dot. Prefers to eat 28grain BBT at 430FPS.
-
Love the builds I am seeing. Custom rigs get my juices flowing :)
Custom 5 lb .25 cal marauder build.
Mods: Regulated, .225"ported, custom valve work / peek poppet, MDS hammer with custom valve lift limiter, custom ssg carrier system, custom ldc, 33cc plenum extension, trigger pull @ 13~ oz. Custom modded gen 1 bolt probe to aid the flow the .225 porting needs. Scratches my itch.
(https://scontent-lax3-2.xx.fbcdn.net/v/t1.6435-9/188539360_10217973742327847_6857378402531800571_n.jpg?_nc_cat=107&ccb=1-3&_nc_sid=dbeb18&_nc_ohc=EIg2x62fk3EAX8PUy_-&_nc_ht=scontent-lax3-2.xx&oh=46a13ebc32d1f75ec48ef36f5af115be&oe=60C83457)
Everything on here (so far) is amazing, really. This Marauder speaks to me on another level however, I'm most interested in something like this. Very well played.
-
This one is a PP750 with a 12” BSA ultra barrel , CARM magazine , AR15 handguard , Atlas clone and the cherry on top a Vortex venom 3moa red dot. Prefers to eat 28grain BBT at 430FPS.
Denis, that is the coolest modded pp750 EVER! They should come like that from the factory LOL...I wish!
-
Thanks Randall, it’s not the nicest , but I can almost guarantee it’s the most expensive. I’ve recently added a plenum with gauge from Wes. Single digit ES using the factory regulator. I love this thing.
-
Love the builds I am seeing. Custom rigs get my juices flowing :)
Custom 5 lb .25 cal marauder build.
Mods: Regulated, .225"ported, custom valve work / peek poppet, MDS hammer with custom valve lift limiter, custom ssg carrier system, custom ldc, 33cc plenum extension, trigger pull @ 13~ oz. Custom modded gen 1 bolt probe to aid the flow the .225 porting needs. Scratches my itch.
(https://scontent-lax3-2.xx.fbcdn.net/v/t1.6435-9/188539360_10217973742327847_6857378402531800571_n.jpg?_nc_cat=107&ccb=1-3&_nc_sid=dbeb18&_nc_ohc=EIg2x62fk3EAX8PUy_-&_nc_ht=scontent-lax3-2.xx&oh=46a13ebc32d1f75ec48ef36f5af115be&oe=60C83457)
Everything on here (so far) is amazing, really. This Marauder speaks to me on another level however, I'm most interested in something like this. Very well played.
I recall this one from back in the day so to speak. Lots of little details added up to a very nice gun. The folded plenum using a CO2 cartridge is a very unique touch.
-
Me likes tactical!
-
Raptor Mega Monster.
-
That Ultra BP conversion is sweet. How does the cocking mechanism fuction?
The build is based on MMC Ultra so hammer and probe are operated independently. At the rear right side you can see a knob on the side of the hammer tube, that one is directly bolted to hammer. Very good for a hunting gun as you can cock and de-cock the hammer while leaving pellet in the barrel. Huub made a small series of these BSA pups before he went and started the Huma-air.
-
Thanks Randall, it’s not the nicest , but I can almost guarantee it’s the most expensive. I’ve recently added a plenum with gauge from Wes. Single digit ES using the factory regulator. I love this thing.
You're welcome! Wes carries plenums with gauge for it too!? That is outstanding! I bet the accuracy is special too! Enjoy that lil beast!