GTA

All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Wood Chop Shop (Working with wood) => Topic started by: ray1377 on March 22, 2021, 11:26:23 AM

Title: Custom made Disco Forestock???
Post by: ray1377 on March 22, 2021, 11:26:23 AM
Hi All
I have removed the regular stock off my benjamin discovery and put the trigger unit / shoulder stock assembly on it off my 1322.
It shortened it a good bit and lightened it also. I really like the pistol grip feel when shooting for a free handing standing position.
My question is, have any of you ever created and or made a forestock to add to this particular setup?
Something like on a 2250 pistol or a PRod front stock piece only a little longer?
If you have any suggestions I would like to hear your input and pictures would be even better.
Thanks
Ray
Title: Re: Custom made Disco Forestock???
Post by: glassman98 on March 22, 2021, 01:00:51 PM
Ray, can you post a pic of what you have so far. I have done a lot of stocks. This what I did to my Diana Bandit pistol.  Craig

(https://i.postimg.cc/PvCmgGwD/Diana-Bandit-Build-012.jpg) (https://postimg.cc/PvCmgGwD)

(https://i.postimg.cc/9DcJSYCr/Diana-Bandit-new-Stock-011.jpg) (https://postimg.cc/9DcJSYCr)
Title: Re: Custom made Disco Forestock???
Post by: ray1377 on March 22, 2021, 10:13:56 PM
Sure thing Craig. Any ideas would be appreciated for sure.
Thanks
Ray
Title: Re: Custom made Disco Forestock???
Post by: Back_Roads on November 09, 2021, 04:10:13 PM
 I'm a little late to this party, but would a P-rod foregrip, yes it will, I just went down to check  8)
 Just incase someone finds this again.
 How did this turn out BTW ???
 NM I read deeper, that was an option but longer was wanted, I too was thinking something longer and maybe with tactical mounting options for bipod etc..
Title: Re: Custom made Disco Forestock???
Post by: Rick67 on November 09, 2021, 06:05:53 PM
Quote from: ray1377 on March 22, 2021, 11:26:23 AM
Hi All
I have removed the regular stock off my benjamin discovery and put the trigger unit / shoulder stock assembly on it off my 1322.
It shortened it a good bit and lightened it also. I really like the pistol grip feel when shooting for a free handing standing position.
My question is, have any of you ever created and or made a forestock to add to this particular setup?
Something like on a 2250 pistol or a PRod front stock piece only a little longer?
If you have any suggestions I would like to hear your input and pictures would be even better.
Thanks
Ray


The PROD forearm actually fits, but it would have that gauge hole, obviously  ;D

The OEM 22xx barrel band also fits into the band slot well—same 1/2” thickness as the PROD’s.

I don’t like plastic, so I let Steve Corcoran make me laminate forearms.

Got 4 of his to match my Vernon Austin grips—-same source of laminate blanks, which is CWP-USA.