GTA

Support Equipment For PCP/HPA/CO2 and springers ,rams => 3D printing and files => Topic started by: scion19801 on March 17, 2021, 06:59:42 PM

Title: element Helix turret rings
Post by: scion19801 on March 17, 2021, 06:59:42 PM

got bored and wanted a better way to easily swap dial yardages between my different projectiles. I came up with this. they're a nice snug fit to the turret cap and easy to mark.
I got one setup for my pellets with my superior liner and one for my slugs in my slug a liner.

Title: Re: element Helix turret rings
Post by: cclfn on March 17, 2021, 07:55:00 PM

Dan,

What a great idea!

Title: Re: element Helix turret rings
Post by: mr007s on March 17, 2021, 09:10:25 PM

Nice work

Title: Re: element Helix turret rings
Post by: scion19801 on March 17, 2021, 10:11:04 PM

Thanks guys.
I been playing with them for the past few days. I take the little arrow opening and center that over the “0” on the elevation turret, which is my 30 yard set point. Then count my clicks according to chairgun and scratch a deepish mark ( they are only a few mills in thickness, and made out of black petg) in at that point and the put some white acrylic paint to make the mark stick out and hopefully not rub off.
I need to get some more colors for my petg that are also hunting acceptable. Like gray and green or brown.