GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: cbourbeau32 on February 20, 2021, 09:59:05 PM
-
My Urban sprung a leak. It's leaking from the area where the fill probe goes. I have a Harbor Freight Metric o-ring kit but I can't find an exact match for any of the three o-rings that go on the manometer end of the fill tube. I can order the replacements off ebay but they ship from the UK so it would be two weeks or so before I received them. Does anyone know the exact sizes of the ones that I need? The one that the manometer screws down onto is way thicker for its size than the others. Any help would be appreciated!
-
How long has your gamo been leaking?
Mine leaked from the time I bought it until I found that the gauge itself was not snugged down. Since then there have been no leaks.
You may not even need orings.
-
How long has your gamo been leaking?
Mine leaked from the time I bought it until I found that the gauge itself was not snugged down. Since then there have been no leaks.
You may not even need orings.
It just started a few days ago. I filled it up and the next day it had leaked off. Before that it held pressure (perfectly, with no leaks) for weeks. I filled to near max psi/bar but I don't think I went over.
-
Short and simple….ignoring the English accent.
https://youtu.be/b8c7AfZL3ko
Haven’t tried to get it off on a fully assembled rifle….might be just enough room to pass the big LDC, might need to remove the barrel.
-
BSA Buccaneer Gamo Urban/ Phox Oring Kits :
https://spares.bagnallandkirkwood.co.uk/product/gamo-urban-22-full-seal-kit-code-gam3/ (https://spares.bagnallandkirkwood.co.uk/product/gamo-urban-22-full-seal-kit-code-gam3/)
https://www.ebay.com/itm/O-Ring-Seal-Kit-for-Gamo-Air-Rifle-Choose-Rifle-Model-Dynamax-Coyote-Phox-etc-/252694446988 (https://www.ebay.com/itm/O-Ring-Seal-Kit-for-Gamo-Air-Rifle-Choose-Rifle-Model-Dynamax-Coyote-Phox-etc-/252694446988)