GTA
Airguns by Make and Model => Weihrauch Airguns => Topic started by: AirTrigr on September 20, 2011, 01:14:01 AM
-
Slowly starting to work on my new AG project, my R1 "SG Hunter"... Just purchased a 19" original HW .20 R1 barrel with breech block from Pyramyd Air (4 a great price IMO, Thanks PA!). Looking to have it chopped to approx 14-16". Anyone have any recommendations on who I could send it to for the chop? I assume it is choked, so it will likely need to have the breech block taken off and the barrel cut at the breech end?? Any ideas? Thanks,
AT ;D
-
Hey AT give me a call at 317-709-3706 :P
-
Steve at Pamona Air (http://www.pomona-airguns.com/ (http://www.pomona-airguns.com/)) can chop and choke the 16mm barrels at a reasonable price. I had a 177 barrel for my R9 done and it's the most pellet friendly and accurate springer I own.
-
I was going to suggest them or Paul Watts or RFM! :P
-
John in PA is doing my RWS 350 c/c/c this week....also a stellar reputation
-
What are you having done to it? :P
-
Thanks for all the replies! You guys (GTA members) are truly priceless!
I'll contact each of the recommended AGSmiths and report back with the latest...
In no particular order:
John in PA
Paul Watts
Steve - Pamona Air
RFM.... ?? Sorry, not familiar yet with that one.
On leave the rest of the week, so if possible could someone pm me their contact info...Mark611 I'll followup to you with a phonecall... Thanks!
AT ;D
-
What are you having done to it? :P
John is chopping the barrel to 16 inches, re-choking, crowning, PG2, lube deburr and button, hone etc etc....and is actually each day readjusting the seals and pre-charge vortek settings to achieve the exact tuned feel that makes his work so unique....he had some fantastic groups last weekend at 50 yds......but he still has gone back in twice since then as he just was not fully satisfied with his art. Consumate professional......Den
-
Cool! :P
-
John's definitely a Good Diana man,but don't forget our very own, Ed aka/Shadow,as he's also an Excellent Tuner as well.