GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: dprutledge@hotmail.com on February 19, 2021, 02:58:32 PM

Title: bottle for AV avenger
Post by: dprutledge@hotmail.com on February 19, 2021, 02:58:32 PM

hello everyone I'm new here. I was wondering if anyone has put a bottle on an AV avenger?

Title: Re: bottle for AV avenger
Post by: FuzzyGrub on February 19, 2021, 05:05:58 PM

Welcome to GTA.  :)

If someone had posted about it, would have caught my eye.   The two air tubes might make it more complicated.   

Title: Re: bottle for AV avenger
Post by: dprutledge@hotmail.com on February 19, 2021, 05:31:12 PM

I was thinking about removing both reservoirs plugging the top one and putting the bottle on the bottom one

Title: Re: bottle for AV avenger
Post by: FuzzyGrub on February 19, 2021, 06:26:50 PM

That would probably need custom made fittings.  Need to find a machinist that has worked with high-pressure air.   You might want to try Duy (DarkCharisma).  He has mounted a bottle to the Liberty, the precursor to the Avenger. 

Title: Re: bottle for AV avenger
Post by: dprutledge@hotmail.com on February 19, 2021, 08:57:08 PM

Thanks FuzzyGrub. I'll give him a call.

Title: Re: bottle for AV avenger
Post by: darkcharisma on February 20, 2021, 01:51:09 AM

I have a post about it. But i need to clear all customers projects before i can start on my own project. it would be an easy thing to do. just need to find time

Title: Re: bottle for AV avenger
Post by: JimD on February 20, 2021, 05:48:15 PM

That could be a really neat mod.  The way the stock attaches you could just remove the two front covers and leave the buttstock attached.  Bottle would be the new fore stock.  Trigger guard is part of the buttstock and there is a plastic cover over the metal parts of the mechanism so it should be pretty straight forward.  Especially for a 25 it could use some more air.