GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Nomadic Pirate on February 03, 2021, 05:40:45 PM
-
I have a couple friend that I made buy Rainstorms, one would like to put the Storm into a synthetic stock,....I've heard that Krals are a copy of the Rainstorm so I was wandering if the stocks can be made to fit, even with a bit of work
I was looking at this stock
https://www.pyramydair.com/product/kral-puncher-mega-synthetic-stock?a=8867 (https://www.pyramydair.com/product/kral-puncher-mega-synthetic-stock?a=8867)
Thanks
-
It should no problem. I can get you any measurements. I have a few mega synthetic stocks.
-
It should no problem. I can get you any measurements. I have a few mega synthetic stocks.
Thank you brother, I'll let my friend know :)
-
Do you have a Rainstorm in hand that you can drop into the stock ?
also do you have them for sale ?
-
Do you have a Rainstorm in hand that you can drop into the stock ?
also do you have them for sale ?
I don't have a rainstorm but the triggers, sear, hammer and levers are all interchangeable along with the airtubes. I don't have any spares but have several rifles that use that stock.
-
Do you have a Rainstorm in hand that you can drop into the stock ?
also do you have them for sale ?
I don't have a rainstorm but the triggers, sear, hammer and levers are all interchangeable along with the airtubes. I don't have any spares but have several rifles that use that stock.
Thanks for the info, do you know where I can find one of them stocks for my friend ? or should he just wait for them to come back in stock at Pyramyd ?
-
Do you have a Rainstorm in hand that you can drop into the stock ?
also do you have them for sale ?
I don't have a rainstorm but the triggers, sear, hammer and levers are all interchangeable along with the airtubes. I don't have any spares but have several rifles that use that stock.
Thanks for the info, do you know where I can find one of them stocks for my friend ? or should he just wait for them to come back in stock at Pyramyd ?
I don't know anyone else with one right now. I have a new 25cal Kral Mega mid tune. It will be available in the synthetic stock.
-
Yeah, my friend would like to put a synthetic stock on his Rainstorm, I might just tell him to pre-order from Pyramyd then, thanks for the info.
-
I've been wanting to do the same with my winchester 70 45 in an attempt to lighten it up a bit.
But ive had this idea over a year now and the stocks have been out of stock the whole time..
Just saying , no telling when they will ever be available
-
I've been wanting to do the same with my winchester 70 45 in an attempt to lighten it up a bit.
But ive had this idea over a year now and the stocks have been out of stock the whole time..
Just saying , no telling when they will ever be available
The Winchester breech is much wider and will take some work to get to fit. I should be able to come up with some soon.
-
Let me know if you do Troy.
-
Why not go with the 10/22 stock mod? Not exactly a direct fit as you know but I think they turn out rather well with a bit of fitting.
-
Why not go with the 10/22 stock mod? Not exactly a direct fit as you know but I think they turn out rather well with a bit of fitting.
A lot of work Denis,
I did one and it's several hours of work, I'm not prepared to do one and I definitely don't think my friend is anywhere near there :)
-
Why not go with the 10/22 stock mod? Not exactly a direct fit as you know but I think they turn out rather well with a bit of fitting.
Are you saying I can put a Rain storm into a 10/22 stock with a little stock carving?
-
Yep you can get it to fit with a lot of work. https://www.gatewaytoairguns.org/GTA/index.php?topic=116402.180 (https://www.gatewaytoairguns.org/GTA/index.php?topic=116402.180)
Some of the pics are missing but the good ones are still there.
-
Thank you.
-
I've been wanting to do the same with my winchester 70 45 in an attempt to lighten it up a bit.
But ive had this idea over a year now and the stocks have been out of stock the whole time..
Just saying , no telling when they will ever be available
The Winchester breech is much wider and will take some work to get to fit. I should be able to come up with some soon.
Good to know . Thanks Troy
-
Kinda pricey and shipping too but i think this is also the same takes AR style butt.https://www.canadashootingsupply.ca/spare-stock-for-black-mamba-guns.html (https://www.canadashootingsupply.ca/spare-stock-for-black-mamba-guns.html)
-
This thread and the link to my old one made me curious so i did a bit of a search and found this :
https://www.opticsplanet.com/pro-mag-ruger-10-22-archangel-rifle-conversion-package-black-aa556r.html (https://www.opticsplanet.com/pro-mag-ruger-10-22-archangel-rifle-conversion-package-black-aa556r.html)
I believe this 10/22 stock will be much easier to do the fitting