GTA

All Springer/NP/PCP Air Gun Discussion General => European/Asian Air Gun Gates => German AirGun Gate => Topic started by: fsa46 on January 09, 2021, 09:32:05 PM

Title: Help !
Post by: fsa46 on January 09, 2021, 09:32:05 PM

Does anyone have a link for the disassembly of a Diana, RWS LP8 ?

Title: Re: Help !
Post by: Denby95 on January 09, 2021, 09:53:46 PM

Try google, it was my first result.

https://www.gatewaytoairguns.org/GTA/index.php?topic=64045.0 (https://www.gatewaytoairguns.org/GTA/index.php?topic=64045.0)

Title: Re: Help !
Post by: Stinger177 on January 09, 2021, 10:38:44 PM

Great link there Rob!

This may also help:

https://www.pyramydair.com/model-schematic/m/diana-rws-lp8/1840 (https://www.pyramydair.com/model-schematic/m/diana-rws-lp8/1840)


And then there is this, but it's for a Magnum LP8. Not sure if there is any difference. I use these TW Chambers links in case I find a part on the floor and forgot where it goes.  ::)

https://www.gunspares.co.uk/products/25071/LP8-Magnum/ (https://www.gunspares.co.uk/products/25071/LP8-Magnum/)

 :D

Title: Re: Help !
Post by: pops76 on January 09, 2021, 11:31:03 PM

I used the GTA link that is listed above to do my trigger work and it worked very good for me.

Title: Re: Help !
Post by: mst3kpimp on January 10, 2021, 02:12:29 AM

heres the main photo of the trigger innards, be sure to swap that spring with a softer one for a much better trigger.  lemme know if you need help as Ive done a complete teardown.

Title: Re: Help !
Post by: fsa46 on January 10, 2021, 06:35:11 AM

Quote from: Denby95 on January 09, 2021, 09:53:46 PM

Try google, it was my first result.

https://www.gatewaytoairguns.org/GTA/index.php?topic=64045.0 (https://www.gatewaytoairguns.org/GTA/index.php?topic=64045.0)

Quote from: Denby95 on January 09, 2021, 09:53:46 PM

Try google, it was my first result.

https://www.gatewaytoairguns.org/GTA/index.php?topic=64045.0 (https://www.gatewaytoairguns.org/GTA/index.php?topic=64045.0)

Outstanding link Rob. Thanks for the reply