GTA

All Springer/NP/PCP Air Gun Discussion General => Projectiles => Boolit and Pellet Casting => Topic started by: rsterne on December 05, 2020, 12:33:27 PM

Title: .30 & .35 cal Magnum Pellet Moulds in Stock at NOE
Post by: rsterne on December 05, 2020, 12:33:27 PM

I don't know when these hit the store, but they are available again for anybody looking.... 59 to 66 gr....

(https://noebulletmolds.com/site/wp-content/uploads/2020/02/300-59-RF_HB_BZ5_.jpg)

https://noebulletmolds.com/site/product-category/308-311/300-59-rf-bz5-magnum-pellet/

Also the .35 cal pellet moulds.... 80 to 90 gr....

(https://noebulletmolds.com/site/wp-content/uploads/2019/11/356-84-RF_CC5_HB.jpg)

https://noebulletmolds.com/site/product-category/358/356-84-rf-cc5/

Bob

Title: Re: .30 & .35 cal Magnum Pellet Moulds in Stock at NOE
Post by: mackeral5 on February 13, 2021, 09:14:09 PM

I just ordered the last of the 4 cavity brass .35 molds.  I hope it will some close to performing like 81gr JSB's....

Title: Re: .30 & .35 cal Magnum Pellet Moulds in Stock at NOE
Post by: rsterne on February 14, 2021, 12:55:58 AM

They shot better than the 81 gr. JSBs in my 26" twist TJ's barrel.... More accurate and a better BC to boot....  8)

Bob

Title: Re: .30 & .35 cal Magnum Pellet Moulds in Stock at NOE
Post by: Bob Pratl on February 14, 2021, 07:03:00 AM

I have the .356 84 mold, it casts and shoots great in my Rex

Title: Re: .30 & .35 cal Magnum Pellet Moulds in Stock at NOE
Post by: mackeral5 on February 14, 2021, 06:08:29 PM

That's great news, thank you for the feedback.  All of my .357 barrels are TJ's 1:26.   

I shoot A LOT of .357, so I expect this mold to pay for itself in short order.   Primarily these will run through a mild little Brod, velocities in the low 800's.

Title: Re: .30 & .35 cal Magnum Pellet Moulds in Stock at NOE
Post by: mackeral5 on March 11, 2021, 08:34:00 PM

This mold is working very well for me.  For some reason the lightest (79gr) and heaviest (91gr) seem to both do better than the middle weight. 

A totally unscientific comment about BC vs JSB--  at my 80 yard 4" gong, noticeably less holdover is required with the 91gr vs JSB 81gr when both are zeroed at 50 yards. 

Great pellets, someday I hope to pick up the .25 mold...

Title: Re: .30 & .35 cal Magnum Pellet Moulds in Stock at NOE
Post by: scion19801 on March 12, 2021, 01:05:00 AM

Quote from: mackeral5 on March 11, 2021, 08:34:00 PM

This mold is working very well for me.  For some reason the lightest (79gr) and heaviest (91gr) seem to both do better than the middle weight. 

A totally unscientific comment about BC vs JSB--  at my 80 yard 4" gong, noticeably less holdover is required with the 91gr vs JSB 81gr when both are zeroed at 50 yards. 

Great pellets, someday I hope to pick up the .25 mold...

There’s is an issue with the .25 magnum mold. Seem the last run was the wrong cut and ended up being the old, inaccurate discontinued style versus the redesign.