GTA
All Springer/NP/PCP Air Gun Discussion General => ***Pay It Forward*** => Topic started by: Long_Gun_Dallas on November 16, 2020, 02:15:40 PM
-
Only have 1. If you have epoxy and a file, that's all thats needed.
Used edge of a flat file to make heavy hash marks on back of end cap and baffle and epoxied together. Thread into shroud with shroud off of gun, and push the baffle from back side with some sort of dowel. I just used a spare barrel laying about.
6.2mm bore, perfect fit for shroud. Goes on back side of end cap that otherwise has a 9.5mm bore.
Makes gun much quieter with a much smaller moderator
-
Will it work on another shroud besides the FX?
-
Will it work on another shroud besides the FX?
It's very precisely cut to go in the fx crown shroud. 25.9mm IIRC. So if you have a shroud that size, and can afix it in the shroud, itd work
-
Ok, thanks for getting back to me. Don't own a FX Crown so hopefully another member here will take you up on your kind offer.
-
I am moving from Springers to PCP with a Benjamin Marauder pistol as my first PCP. I am buying it second hand and would be on GTA for all the tips i can get...Mods and stock improvements especially. The guy selling the Marauder broke off the pistol grip/stock. He says the gun works great and the stock can be fixed.
I am not sure yet if the FX Crown baffle will fit on the Marauder pistol. If it does not fit...and noone claims your generous offer...may i kindly have the baffle? One day i would like to own an FX Crown.
Thanks