GTA
GTA Airgunning Classifieds => Hobbyist Classifieds Gate => Hobbyist Classifieds Archive => Topic started by: AustinBinTX on July 04, 2020, 08:03:39 PM
-
I made a few of these up to test out, but I just don’t shoot enough to really put them through their paces.
They seem fairly effective to me, but it’s hard for me to tell.
These monocore internals replace your stock baffles. They are good for .25 and under.
I designed these to fit pretty snug on my first test rifle. I bought a second rifle and they were a little looser, but still within spec.
Some may have some lead dust on them when you receive them. I test each one on a .25 BT65 to check for clipping.
These are printed from high strength US made PETG. Color will either be red or black for the test units. There is zero difference between the two, I just had 1kg of red to burn before I started in on my stockpile of black. There may be minor stringing, but it will not effect anything.
I have 5 of these I’m willing to ship out at no cost. All I ask in return is to use them, and give me some feedback so I can make changes if needed.
I’d like to keep it to one test unit per member so they have the best chance of getting a decent amount of use.
I will ship these out via USPS first class package.
Please PM me if you would like to try one out.
Thanks,
AustinB