GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: uswood on June 13, 2020, 03:50:47 PM
-
Are parts easy to come by for this gun?Looking for my first PCP. I like the new Avenger but with only one year warranty, no one knowes if parts will be avalible.I think the Xisico 705 .22 from Flying Dragon would be the way to go! Thanks!
-
I'm pretty sure that if you need parts that Mike M can get them for you if you need them @ FDAR ??? I really have been having a lot of fun with the Sentry's, I've got a new 702 .22, the 705-2 25cal and the 705-9K .22. All three I've modified with fantastic results. I've been shooting slugs through two of them with fantastic results.
-
I'm pretty sure that if you need parts that Mike M can get them for you if you need them @ FDAR ??? I really have been having a lot of fun with the Sentry's, I've got a new 702 .22, the 705-2 25cal and the 705-9K .22. All three I've modified with fantastic results. I've been shooting slugs through two of them with fantastic results.
If I could get one of the .22's to shoot 900fps with a 18gr pellet would be my goal.Are these guns hard to pump with a hand pump? Thanks!
-
I've been filling mine from my SCBA tanks but 3K isn't that hard to pump up to.
Here's a chrony pic/string that I did with the 702-5K which was my most recent purchase from Mike, I never shot it until I took it completely apart and went through it. You'll have to open the valve exhaust port, transfer port and breech port to get good results. 5/32" on the .22's works good, my .25 is 3/16" There's even a guy that has one doing 100fpe these days, they'll do some unreal power for sure.
(https://i.imgur.com/ZVgDw5q.jpg)
this is even with the short barrel to boot !!!