GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Whatsquirrel on May 23, 2020, 10:02:46 PM
-
Got the Flex today & shot a few across the chrony. I want to speed it up to about 920-930 with 25gr kings. Right now I can get to to 850but it’s an air hog. Is there a good starting point on adjustments to start from?? The reg is set at 1800 & I turned the hammer spring 4 turns from where it was at to get it to 850. Any info is much appreciated.
-
Got the Flex today & shot a few across the chrony. I want to speed it up to about 920-930 with 25gr kings. Right now I can get to to 850but it’s an air hog. Is there a good starting point on adjustments to start from?? The reg is set at 1800 & I turned the hammer spring 4 turns from where it was at to get it to 850. Any info is much appreciated.
It looks like you have a Warp, NOT a Flex. The warp (pronounced like "Warping" space time) doesn't have a carry handle on the lower reciever/chassis and has a shorter barrel. Because of the shorter barrel, my guess is that you could have already surpassed the maximum possible velocity:efficency, and are now wasting air (which also can have a destabilizing factor when the projectile is exiting the muzzle btw).
-
Disregard this thread. I think I’ve got it figured. Being it’s not a Flex & it’s WarP.