GTA
GTA Airgunning Classifieds => Hobbyist Classifieds Gate => Hobbyist Classifieds Archive => Topic started by: a1rgunz on March 02, 2020, 07:44:31 PM
-
I've designed an affordable and effective LDC for the Crosman lego guns and have loads of them made and ready to ship for $25. They are .94" (24mm) in diameter and 6" (152mm) in length:
(https://www.airgununiverse.net/wp/wp-content/uploads/2020/02/front.jpg)
(https://www.airgununiverse.net/wp/wp-content/uploads/2020/02/overview.jpg)
They secure to the barrel with 4 grub screws, simply tighten until you feel each one touch the barrel, no need to torque them down. You can leave them as-is or paint them to match your airgun's color scheme. These are made with hunting rigs in mind, not safe queens. They are constructed with a 3D printed monocore set in a tough polymer shell. How quiet are they? Here's a sound recording that shows the relative difference:
(https://www.airgununiverse.net/wp/wp-content/uploads/2020/02/LDCcomp.jpg)
These might work on other airguns, but I am only guaranteeing them for the 22XX/13XX platforms at this time. The first person who wants to work with me and test one on a Maximus can get one of these for free ;D
I've also got a couple of short LDCs for the Barra Cowboy 1866 rifles. They are short, so they only take the pop off the shot. They also feature a hooded front sight designed to give a more precise sight picture. They can be used with the stock rear sight, or you can add an aftermarket tang or receiver sight for even better results. They are $15 shipped
(https://www.airgununiverse.net/wp/wp-content/uploads/2019/12/IMG_20191226_180646-2.jpg)
Pop out the old barrel plug and press this one in its place. You can leave the stock front sight in place or remove it for better looks.
I've got a couple of my 3D printed LDCs for Daisy rifles in stock. They run $18 shipped for the model with a front sight and $15 shipped without the front sight. These are designed to stand up to normal use, but they can break if you drop your gun. Such breakage isn't covered under warranty.
(https://www.airgununiverse.net/wp/wp-content/uploads/2020/01/IMG_20200102_205427.jpg)
I stand behind the products I sell when they are unmodified and used as intended. If you have any issues in the first 30 days after receiving your order, I'll do what it takes to make things right. Thanks for looking, feel free to PM me if you'd like to order or have any questions.