GTA

Airguns by Make and Model => Crosman Airguns => Topic started by: basednibbba on January 10, 2020, 08:06:45 PM

Title: Crosman steel breech kit plug is oversized
Post by: basednibbba on January 10, 2020, 08:06:45 PM

Seriously? Very poor product. The plug is 0.005” oversized and I had to pry it out of the breech. Not sure how I am supposed to “install” it as the instructions read so nonchalantly.

Title: Re: Crosman steel breech kit plug is oversized
Post by: rocks on January 19, 2020, 05:04:18 PM

had same problem had to fill down till it went in

Title: Re: Crosman steel breech kit plug is oversized
Post by: Lt. Dan on January 19, 2020, 06:52:02 PM

I had the same problem also.  I used a Dremel and a fine rock till it fit then I  polished it.

Title: Re: Crosman steel breech kit plug is oversized
Post by: CraigH on January 19, 2020, 07:22:59 PM

I have not had the problem - 5 .22 steel breeches.    The good news is the gun will work fine without the cap.   (Inadvertently discovered a few years ago)

Title: Re: Crosman steel breech kit plug is oversized
Post by: Crosman Engineer on January 20, 2020, 01:17:59 PM

All - We are aware of the problem and are fixing it. Sorry about the inconvenience.

John