GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: oldpro on December 03, 2019, 12:17:21 PM
-
Are there any 5/8 standard threaded carbon tanks with a 2” od??? Haven’t seen any as they all seam to be M18
-
https://www.aliexpress.com/item/32816776386.html?spm=a2g0o.productlist.0.0.171073f7ZKytLO&algo_pvid=891eb0d6-737d-4617-b57b-1a210bfb50ab&algo_expid=891eb0d6-737d-4617-b57b-1a210bfb50ab-3&btsid=7f000931-c1ce-4d2b-b09c-c9bbdb6bfd23&ws_ab_test=searchweb0_0,searchweb201602_10,searchweb201603_55 (https://www.aliexpress.com/item/32816776386.html?spm=a2g0o.productlist.0.0.171073f7ZKytLO&algo_pvid=891eb0d6-737d-4617-b57b-1a210bfb50ab&algo_expid=891eb0d6-737d-4617-b57b-1a210bfb50ab-3&btsid=7f000931-c1ce-4d2b-b09c-c9bbdb6bfd23&ws_ab_test=searchweb0_0,searchweb201602_10,searchweb201603_55)
-
https://www.aliexpress.com/item/32816776386.html?spm=a2g0o.productlist.0.0.171073f7ZKytLO&algo_pvid=891eb0d6-737d-4617-b57b-1a210bfb50ab&algo_expid=891eb0d6-737d-4617-b57b-1a210bfb50ab-3&btsid=7f000931-c1ce-4d2b-b09c-c9bbdb6bfd23&ws_ab_test=searchweb0_0,searchweb201602_10,searchweb201603_55 (https://www.aliexpress.com/item/32816776386.html?spm=a2g0o.productlist.0.0.171073f7ZKytLO&algo_pvid=891eb0d6-737d-4617-b57b-1a210bfb50ab&algo_expid=891eb0d6-737d-4617-b57b-1a210bfb50ab-3&btsid=7f000931-c1ce-4d2b-b09c-c9bbdb6bfd23&ws_ab_test=searchweb0_0,searchweb201602_10,searchweb201603_55)
Thats not carbon
-
bump
-
Still searching!
I'm finding them in the fat bottle tanks so far, still looking!
Mike
-
Will this work? I don't think so. GRRRRR!!!
www.ebay.com/itm/0-5L-4500psi-30Mpa-Carbon-Fiber-Cylinder-PCP-Tank-Thread-5-8-18unf-Mfr-2018/173433632387 (http://www.ebay.com/itm/0-5L-4500psi-30Mpa-Carbon-Fiber-Cylinder-PCP-Tank-Thread-5-8-18unf-Mfr-2018/173433632387)
-
Will this work? I don't think so. GRRRRR!!!
www.ebay.com/itm/0-5L-4500psi-30Mpa-Carbon-Fiber-Cylinder-PCP-Tank-Thread-5-8-18unf-Mfr-2018/173433632387 (http://www.ebay.com/itm/0-5L-4500psi-30Mpa-Carbon-Fiber-Cylinder-PCP-Tank-Thread-5-8-18unf-Mfr-2018/173433632387)
That's 60mm or 2.36" in diameter so nope does not fit OPs criteria.
BD
-
I'm following this thread, I have been looking for one for my Gauntlet on AliExpress for a while. Searching that site is such a convoluted mess. Good luck, Travis!
-
Will this work? I don't think so. GRRRRR!!!
www.ebay.com/itm/0-5L-4500psi-30Mpa-Carbon-Fiber-Cylinder-PCP-Tank-Thread-5-8-18unf-Mfr-2018/173433632387 (http://www.ebay.com/itm/0-5L-4500psi-30Mpa-Carbon-Fiber-Cylinder-PCP-Tank-Thread-5-8-18unf-Mfr-2018/173433632387)
That's 60mm or 2.36" in diameter so nope does not fit OPs criteria.
BD
That's a pretty good find, though---- a .500l that can use Ninja regs vs the sloppy M18 regs. I would have bought this had I found it last year.
-
Will this work? I don't think so. GRRRRR!!!
www.ebay.com/itm/0-5L-4500psi-30Mpa-Carbon-Fiber-Cylinder-PCP-Tank-Thread-5-8-18unf-Mfr-2018/173433632387 (http://www.ebay.com/itm/0-5L-4500psi-30Mpa-Carbon-Fiber-Cylinder-PCP-Tank-Thread-5-8-18unf-Mfr-2018/173433632387)
That's 60mm or 2.36" in diameter so nope does not fit OPs criteria.
BD
That's a pretty good find, though---- a .500l that can use Ninja regs vs the sloppy M18 regs. I would have bought this had I found it last year.
Yea I bought a M18 one for my brod with a 2200 psi reg that does clear the shroud on the brod. I have had no issues with Chinese reg even after many pressure adjustments. currently set at 2000 psi to sling 25grain AAs out at 910 fps.
BD
-
Will this work? I don't think so. GRRRRR!!!
www.ebay.com/itm/0-5L-4500psi-30Mpa-Carbon-Fiber-Cylinder-PCP-Tank-Thread-5-8-18unf-Mfr-2018/173433632387 (http://www.ebay.com/itm/0-5L-4500psi-30Mpa-Carbon-Fiber-Cylinder-PCP-Tank-Thread-5-8-18unf-Mfr-2018/173433632387)
That will work!!! And its acecare a reputable company. Thanks Michael
-
Will this work? I don't think so. GRRRRR!!!
www.ebay.com/itm/0-5L-4500psi-30Mpa-Carbon-Fiber-Cylinder-PCP-Tank-Thread-5-8-18unf-Mfr-2018/173433632387 (http://www.ebay.com/itm/0-5L-4500psi-30Mpa-Carbon-Fiber-Cylinder-PCP-Tank-Thread-5-8-18unf-Mfr-2018/173433632387)
That's 60mm or 2.36" in diameter so nope does not fit OPs criteria.
BD
That's a pretty good find, though---- a .500l that can use Ninja regs vs the sloppy M18 regs. I would have bought this had I found it last year.
Yea I bought a M18 one for my brod with a 2200 psi reg that does clear the shroud on the brod. I have had no issues with Chinese reg even after many pressure adjustments. currently set at 2000 psi to sling 25grain AAs out at 910 fps.
BD
Agreed on the functionality of the chinese regs, I just don't like their tolerances at the bonnet to reg interface and the single o ring plungers. The chinese bonnets I have seem a little "soft" to me as well. I have 2---1 on a .35l and one on a .5l bottle. Both have Ninja plungers and bonnets.
-
Some better than others, Ive seen some very sketchy regs. from China thats why were having NINJA make ours.
-
Lengthen the drop down c-c distance to something like 1.75" and then load up a 1.1L carbon bottle...and live with its M18x1.5 threads...:)
cheers,
Douglas
-
Will this work? I don't think so. GRRRRR!!!
www.ebay.com/itm/0-5L-4500psi-30Mpa-Carbon-Fiber-Cylinder-PCP-Tank-Thread-5-8-18unf-Mfr-2018/173433632387 (http://www.ebay.com/itm/0-5L-4500psi-30Mpa-Carbon-Fiber-Cylinder-PCP-Tank-Thread-5-8-18unf-Mfr-2018/173433632387)
That's 60mm or 2.36" in diameter so nope does not fit OPs criteria.
BD
That's a pretty good find, though---- a .500l that can use Ninja regs vs the sloppy M18 regs. I would have bought this had I found it last year.
Yea I bought a M18 one for my brod with a 2200 psi reg that does clear the shroud on the brod. I have had no issues with Chinese reg even after many pressure adjustments. currently set at 2000 psi to sling 25grain AAs out at 910 fps.
BD
Agreed on the functionality of the chinese regs, I just don't like their tolerances at the bonnet to reg interface and the single o ring plungers. The chinese bonnets I have seem a little "soft" to me as well. I have 2---1 on a .35l and one on a .5l bottle. Both have Ninja plungers and bonnets.
Glad the bottle will work for you Travis. ;D 8)
BD
-
Whew! That was close. LOL
Knife