GTA
Airguns by Make and Model => Crosman Airguns => Topic started by: Airnut on November 23, 2019, 03:10:48 AM
-
I did something really STUPID and broke my stock on my Storm. I would like to replace it with a thumb hole stock but I don't know much about what stocks will interchange. I contacted Crosman and they still have the stock but as for what will interchange they would not say. I researched it and think that a Titan stock will fit the action without any mods? Are there any other options? Thanks in advanced for any help!!
-
You should be able to go to Crosman site and check some of the parts drawing and parts list of similar guns. The part number should be the same for the stock from one gun to the next.
-
I tried that and found a few stocks that have the same call out number but different part numbers.
Are you saying that if they have the same call out number they should fit?? I don't know how crosman does things but that does not sound right. That would be way to easy!
Thanks.
-
I did a bit of surfing. I got that the Storm is a CF1K77X. If that is the case, the Crosman parts breakdown is here: https://support.crosman.com/hc/en-us/articles/204787060-CF1K77X-Owner-s-Manual-EVP-2012-2013-
Note that many part numbers begin with either B18 or B19. That indicates it is a member of the Chinese B18/B19 family of airguns. With that knowledge you may begin to hunt for a stock you want. I had a Crosman Nitro Venom and the stock from that would fit, as would the stock from a Benjamin Regal. Besides the stock other variations among models are the inclusion of open sights (or not) and whether the scope mount is dovetail or Weaver. The Regal even had a metal trigger guard - I put one of them on my Venom after breaking the original. The B18/B19 is truly a mix and match type of a gun. Enjoy.
-
Thanks Thomas!!
That really helps a lot!
Lets make sure that I got this right. If the part number starts with b18/b19 then it will fit?
That sounds easy. Does the year of manufacture have any bearing on fitment?
My storm was made 09-2007 and listed as a CLK77X
Its raining today and I was wondering what I was going to do today. Looks like I will be spending a few hours on the crosman site.
-
The Titan stock will fit as will the Trail.
The Trail XL will not fit as the gun is longer than the others.
Titan stock:
C8M22NP-01-00
Trail stock:
BT9M22WNP-01-00
-
I think any NP stock will work. The only thing that might differ is the plastic end cap on the rear of the action.